Connector(s)
Connector Type(s)
1 - HDMI (19 pin)
1 - VGA (15 pin, High Density D-Sub)
1 - USB Type-A (9 pin, 5 Gbps)
1 - USB 3.2 Type-A with BC 1.2 (9 pin, Gen 1, 5Gbps, 7.5W Power)
1 - USB 3.2 Type-C (24 pin, Gen 1, 5Gbps)
1 - USB Type-C (24 pin) USB Power Delivery Only
1 - RJ-45
Host Connectors
1 - USB 3.2 Type-C (24 pin, Gen 1, 5Gbps)
Hardware
4K Support
Yes
Fast-Charge Port(s)
Yes
Displays Supported
1
Interface
USB 3.2 Gen 1
Bus Type
USB-C
Industry Standards
IEEE 802.3
IEEE 802.3u
IEEE 802.3ab
USB 3.1 Gen 1 (5Gbps)
Chipset ID
Realtek - RTL8153
Parade Technologies - PS176
VIA Tech - VL102
VIA Tech - VL817
Indicators
LED Indicators
1 - Network Speed LED
1 - Network Activity LED
Performance
Wake On Lan
Yes
Maximum Data Transfer Rate
5 Gbps (USB 3.1 Gen 1)
2 Gbps (Ethernet; Full-Duplex)
Maximum Digital Resolutions
HDMI: 4K 30Hz
VGA: 1080p 60Hz
Type and Rate
USB 3.2 Gen 1 - 5 Gbit/s
UASP Support
Yes
Compatible Networks
10/100/1000 Mbps
PXE
Yes
Full Duplex Support
Yes
Power
Power Source
Bus Powered and Host USB-C Power Adapter
Power Delivery
100W
Output Voltage
5 DC
Power Consumption (In Watts)
15W
Software
OS Compatibility
Windows® 7, 8, 8.1, 10, 10 ARM, 11, 11 ARM
macOS 10.9 to 10.15, 11.0, 12.0, 13.0, 14.0
Chrome OS™
Special Notes / Requirements
Note
Jumbo Frames are no longer supported in macOS
The multifunction adapter does not include a USB-C power adapter. Optional: the multifunction adapter can be used with a separate USB-C power adapter (for example, your laptop's USB-C based power adapter)
Not all USB-C ports support the full functionality of the USB Type-C standard. Ensure that your host USB-C port supports USB Power Delivery and DP alt mode
The adapter can connect to a host laptop's USB-C port that doesn't support USB Power Delivery. However, in this configuration if a power adapter is connected to the multifunction adapter, it will not pass power through to your host laptop
System and Cable Requirements
A host laptop with an available USB-C port (to ensure full adapter functionality, the host USB-C port must support USB Power Delivery and DP alt mode).