ARDEX K310 is a single component, rapid setting, self-levelling and smoothing compound with built-in synthetic latex polymer.

Suitable for preparing interior floors prior to laying parquet, vinyl sheet and tile, soft floor coverings, natural stone, ceramic tiles etc.

It can be used on a wide range of absorbent and non-absorbent substrates including concrete, cement, sand screeds and ceramic.

USE ARDEX K310 are used for smoothing concrete or screed before the installation of vinyl & rubber sheets, tiles,paving slabs, levelling of old and worn concrete screeds.

BENEFITS
• Single component (Just mix with water)
• Excellent adhesion (To primed substrates. PLEASE PURCHASE THE PRIMERS - ARDEX P51/P82 AT OUR EEZEE SHOP)
• Fast drying for early utilisation (Rapid setting and early strength)
• Superior self-levelling/ smooth property • User-friendly (Easy and quick to lay)

THICKNESS
It can be laid at depths from 2mm up to 6mm in one application.

For 7-10mm, incorporate up to an equal volume for 3mm single sized quartz sand.

For thickness exceeding 20mm up to 35mm, up to an equal volume of 3 - 8mm aggregate may be used.

Use the water ratio of approx. 20 - 24% to ARDEX K310 and the aggregate without further addition of water.

COVERAGE
Depending on the roughness and surface profile of the floor, the application thickness is 3mm and the coverage will be approx.

5.5m² per 25kg per bag. PACKAGING ARDEX K310 is packed in paper sack incorporating a polyethylene liner- net weight 25kg.

IN ORDER TO ACHIEVE THE BEST RESULTS FOR ARDEX K310, IT IS IMPORTANT TO PRIME YOUR SUBFLOOR/SUBTRATE. KINDLY VISIT OUR EEZEE SHOP TO PURCHASE THE ARDEX P51 PRIMER OR ARDEX P82 PRIMER TO APPLY ONTO YOUR SUBFLOOR.