Cable length: 2 m
Product Family: Sensor / Actuator Connectors
Product Sub Family: M12 Standard
Connector Type: Cordset, single ended
Type of Contact / Gender: Male
Connector Design: Angled
Number of Pins: 4
Coding: A
Shielding: Unshielded
Attachment Type: Coupling Screw
Rated Voltage: 250 V
Rated Voltage (UL): 250 V AC
Rated Impulse Voltage: 2.5 kV
Operating Voltage: 230 V AC/DC
Rated Current: 4 A
Rated Current (UL): 4 A
Contact Resistance: ≤ 10 mOhm
Insulation Resistance: ˃ 10^9 Ohm
Mating Cycles: ≤ 100
Ambient Temperature (Operation): -40 °C to +90 °C
Operating Temperature (UL): Max. +50 °C
Protection Degree / IP Rating: IP65, IP67, IP68 (1 m / 24 h), IP69K
Design Standard: IEC 61076-2-101
Pollution Degree: 3 acc. to DIN EN 60664-1 (VDE 0110-1)
Overvoltage Category: II acc. to DIN EN 60664-1 (VDE 0110-1)
- Contact Base Material: CuSn
- Contact Plating: Cu/Au
- Contact Bearer Material: TPU
- Contact Bearer Color: Orange
- Flammability Class (Contact Bearer): UL 94 HB
- Molded Body Material: TPU
- Molded Body Color: Translucent
- Flammability Class (Molded Body): UL 94 HB
- Attachment Material: CuZn
- Attachment Plating: Nickel-plated
- Fastening Torque (Attachment): M 12x1: (50-60) Ncm, hand-tight
- Cable Number: 500
- Conductor Size: 0.34 mm²
- Number of Wires: 4
- Minimal Bending Radius (Fixed Inst): ˃ 5 x D
- Minimal Bending Radius (Flexible Inst): ˃ 7.5 x D
- Cycles (Bending): ˃ 5 M
- Welding Resistance: Welding spark resistant
- Conductor Material: Cu
- Cable Jacket Material: PUR
- Cable Jacket Color: Black
- Cable Diameter D: Ø 5.1 ± 0.15 mm
- Wire Insulation Material: TPE-P
- Insulated Wire Diameter: Ø 1.30 mm
- Ambient Temperature (Fixed Installation): -50 °C to +80 °C
- Ambient Temperature (Flex Installation): -40 °C to +80 °C
- Ambient Temperature (Drag Chain Inst): +5 °C to +60 °C
- UL Cable Type: AWM: 20549
- Flammability Class (Cable Jacket): UL Horizontal Flametest, CSA FT2
- UL-File: E315587
- UL: UL 2238; cURus
- Halogenfree: EN 50267-2-1
- Note Derating: Notice derating
- Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg Automation connector
- General Note: Do not connect or disconnect under load.