Cable length: 2m
- Product Family: Power Connector
- Product Sub Family: M23 Power
- Connector Type: Cordset, single ended
- Type of Contact / Gender: Male
- Connector Design: Straight
- Number of Pins: 19
- Shielding: Unshielded
- Attachment Type: External thread fixed
- Rated Voltage: 125 V
- Rated Impulse Voltage: 1.5 kV
- Operating Voltage: 120 V AC/DC
- Rated Current: 16 x 8 A (pin-Ø 1 mm), 3 x 10 A (contact-Ø 1.5 mm)
- Insulation Resistance: ˃ 10^9 Ohm
- Mating Cycles: ≤ 100
- Ambient Temperature (Operation): -25°C to +80°C
- Protection Degree / IP Rating: IP67
- Pollution Degree: 3 acc. to DIN EN 60664-1 (VDE 0110-1)
- Clearance / Creepage Distance: Acc. to DIN EN 60664-1 (VDE 0110-1)
- Overvoltage Category: II acc. to DIN EN 60664-1 (VDE 0110-1)
Materials
- Contact Base Material: CuZn
- Contact Plating: Cu/Au
- Contact Bearer Material: PBT
- Contact Bearer Color: White
- Flammability Class (Contact Bearer): UL 94 V0
- Molded Body Material: TPU
- Molded Body Color: Black
- Flammability Class (Molded Body): UL 94-HB
- Attachment Material: CuZn, nickel-plated
- O-Ring Material: FKM
Cable Data
- Cable Number: 242
- Conductor Size: 16x0.5mm² + 3x1.0 mm²
- Number of Wires: 19
- Minimal Bending Radius (Fixed Inst): ˃ 5 x D
- Minimal Bending Radius (Flexible Inst): ˃ 10 x D
- Cycles (Bending): ˃ 2 M
- Conductor Material: Cu
- Cable Jacket Material: PUR
- Cable Jacket Color: Black
- Cable Diameter D: Ø 11.60 ±0.30 mm
- Wire Insulation Material: PP
- Insulated Wire Diameter: 16x Ø1.45 mm + 3x Ø1.95 mm
- Ambient Temperature (Fixed Installation): -50°C to +80°C
- Ambient Temperature (Flex Installation): -25°C to +80°C
- Ambient Temperature (Drag Chain Inst): Max. +60°C
- UL Cable Type: AWM: 21198 / 20549
- Flammability Class (Cable Jacket): IEC 60332-2, VDE 0482-265-2-2, EN 50265-2-2, FT2; Flame-retardant
Safety & Environmental Compliance
Resistances
- Halogenfree: IEC 60754-1, VDE 0482-267, EN 50267-2-1
Notes
- Note Derating: Notice derating
- Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.
- General Note: Do not connect/disconnect under load.
- Particularities: When the connector is unlocked and at risk of pollution, the connector must be covered with a protective cap ≥ IP54.