Cable length: 5m
- Product Family: Sensor / Actuator Connectors
- Connector Type: Cordset, double ended
- Shielding: Shielded
- Rated Voltage: 60 V
- Rated Impulse Voltage: 1.5 kV
- Operating Voltage: 50 V AC / 60 V DC
- Rated Current: 4 A
Technical Data Side 1
- Product Sub Family: M12 Standard
- Type of Contact / Gender: Male
- Connector Design: Angled
- Attachment Type: Coupling Screw
- Number of Pins: 5
- Coding: A
- Contact Resistance: ≤ 10 mOhm
- Insulation Resistance: ˃ 10^9 Ohm
- Mating Cycles: ≤ 100
- Ambient Temperature (Operation): -25 °C - +70 °C
- Protection Degree / IP Rating: IP65, IP67, IP68 (1 m / 24 h)
- Design Standard: IEC 61076-2-101
- Pollution Degree: 3 acc. to DIN EN 60664-1 (VDE 0110-1)
- Overvoltage Category: III acc. to DIN EN 60664-1 (VDE 0110-1)
- Contact Base Material: CuSn
- Contact Plating: Cu/Au
- Contact Bearer Material: PA
- Contact Bearer Color: Black
- Flammability Class (Contact Bearer): UL 94 V-0
- Molded Body Material: TPU
- Molded Body Color: Orange
- Flammability Class (Molded Body): UL 94 V-2
- Attachment Material: CuZn
- Attachment Plating: Nickel-plated
- Shielding Material: Housing: GD-Zn, nickel-plated, Sleeve: CuZn, tin-plated
- Fastening Torque (Attachment): M 12x1: (50-60) Ncm, hand-tight
- Note: Do not connect or disconnect under load
Cable Data
- Cable Number: 183
- Conductor Size: 0.34 mm²
- Number of Wires: 5
- Minimal Bending Radius (Fixed Inst): ˃ 8 x D
- Minimal Bending Radius (Flexible Inst): ˃ 15 x D
- Conductor Material: Cu
- Cable Jacket Material: PVC
- Cable Jacket Color: Orange
- Cable Diameter D: ø 5.0 ± 0.2 mm
- Wire Insulation Material: PVC
- Insulated Wire Diameter: ø 1.50 mm
- Overall Shield (Cable): Braid
- Ambient Temperature (Fixed Installation): -30 °C - +70 °C
- Ambient Temperature (Flex Installation): +5 °C - +70 °C
- Flammability Class (Cable Jacket): DIN EN 60332-1-2, VDE 0482-332-1-2, IEC 60332-1-2
- Cable Characteristics: Free of lacquer wetting disturbing substances; Exclusion of silicone
Technical Data Side 2
- Product Sub Family: M12 Standard
- Type of Contact / Gender: Female
- Connector Design: Angled
- Attachment Type: Coupling Nut
- Number of Pins: 5
- Coding: A
- Contact Resistance: ≤ 10 mOhm
- Insulation Resistance: ˃ 10^9 Ohm
- Mating Cycles: ≤ 100
- Ambient Temperature (Operation): -25 °C - +70 °C
- Protection Degree / IP Rating: IP65, IP67, IP68 (1 m / 24 h)
- Design Standard: IEC 61076-2-101
- Pollution Degree: 3 acc. to DIN EN 60664-1 (VDE 0110-1)
- Overvoltage Category: III acc. to DIN EN 60664-1 (VDE 0110-1)
- Contact Base Material: CuSn
- Contact Plating: Cu/Au
- Contact Bearer Material: PA
- Contact Bearer Color: Black
- Flammability Class (Contact Bearer): UL 94 V-0
- Molded Body Material: TPU
- Molded Body Color: Orange
- Flammability Class (Molded Body): UL 94 V-2
- Attachment Material: CuZn
- Attachment Plating: Nickel-plated
- Shielding Material: Housing: GD-Zn, nickel-plated, Sleeve: CuZn, tin-plated
- O-Ring Material: FKM, green
- Fastening Torque (Attachment): M 12x1: (50-60) Ncm, hand-tight
Safety & Environmental Compliance
Resistances
- Oil Resistance: Good chemical and oil resistance
Notes
- Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg Automation connector
- Note Derating: Notice derating