UZIN NC 888 S is a rapid drying patching and smoothing compound that has very fine aggregates and can therefore be applied by trowel from a true feather edge up to 4 mm depth in a single application.
It can be used on a variety of substrates to repair substrate imperfections prior to installation of most flooring products.
Floor coverings can be installed within 15 minutes on absorbent substrates. For interior use.
Rapid drying feather coat
· no primer required
· extremely rapid drying
· excellent surface finish
· good adhesion and very smooth finish
· good absorbence
Main application area:
· repair of trowel marks or imperfections on old or new levelling layers
· part-levelling and filling of holes or trowel marks
· skim-coating
· from a "feather-edge" up to 4 mm thickness
Applied Areas:
· new or old cement levelling compounds
· old screeds or concrete, which may contain old compounds and adhesive residues
· dense, mineral substrates existing ceramic and natural stone coverings, terrazzo or similar
· precast screeds, screed boards
· existing and new P4 - P7 or OSB 2 - OSB 4 boards, screwed or installed floatingly
· warm water underfloor heating systems or thin film heating systems
· exposure to castor wheels in accordance with DIN EN 12 529 from 1 mm thickness
suitable for residential, commercial and industrial areas