Belden 1633ENH.00305 Cable Ftp Cat 5E 4X 2XAWG 24 Gray 1000FT/ Roll

Category 5e Premise Horizontal Cable (100MHz), 4-Pair, 24 AWG solid bare copper conductors, F/UTP, Polyethylene insulation, Beldfoil® shield, AWG 26 solid tinned copper drainwire, LSZH jacket.

Conductor:

• Element:
• Size: 24 AWG
• Stranding: Solid
• Material: BC - Bare Copper
• No. of Pairs: 4

Insulation:

• Element:
• Material: PE - Polyethylene
• Nom. Insulation Diameter: 1.05 mm (0.0413 in)

Outer Shield:

• Shield Type: Tape
• Material: Bi-Laminate (Alum+Poly)
• Coverage: 100%
• Drainwire Type: 26 AWG (Solid) TC

Outer Jacket:

• Material: LSZH - Low Smoke Zero Halogen (Flame Retardant)
• Nom. Diameter: 6.0 mm (0.24 in)

Electrical Characteristics:

• Electricals:
• Max. Conductor DCR: 95 Ohm/km (29 Ohm/1000ft)
• Max. Mutual Capacitance: 56 pF/m (17 pF/ft)
• Max. Capacitance Unbalance: 160 pF/100m
• Nom. Characteristic Impedance: 100 Ohm
• Delay:
• Max. Delay Skew: 40 ns/100m
• Nom. Velocity of Prop.: 69%
• Transfer Impedance:
• Frequency:
• 1 MHz: Max. 50 mOhm/m
• 10 MHz: Max. 100 mOhm/m
• 30 MHz: Max. 200 mOhm/m
• 100 MHz: Max. 1000 mOhm/m
• Transfer Impedance Class: Grade 2
• Voltage:
• Voltage Rating: 72 V DC

Mechanical Characteristics:

• Temperature:
• Operating: -30°C to +60°C
• Installation: 0°C to +50°C
• Bend Radius:
• Installation Min.: 48 mm (1.9 in)
• Max. Pull Tension: 72 N (16 lbf)
• Bulk Cable Weight: 39 kg/km (26 lbs/1000ft)

Standards and Compliance:

• Environmental Suitability: Indoor - Euroclass Dca
• Flammability / Reaction to Fire: IEC 60332-1-2
• CPR Compliance:
• CPR Euroclass: Dca-s2,d2,a1
• CPR UKCA Class: Dca-s2,d2,a1
• IEEE Compliance: PoE: IEEE 802.3bt Type 1, Type 2, Type 3
• Data Category: Category 5e
• ISO/IEC Compliance:
• ISO/IEC 11801-1
• IEC 61034-2 - Smoke Density Min Transmittance = 60%
• CENELEC Compliance: EN 50173-1, Segregation class according to EN50174-2 = c
• European Halogen Free Standards:
• IEC 62821-1 Halogen Free Compliance = Yes
• IEC 60754-1 - Halogen Amount = Zero
• IEC 60754-2:
• Halogen Acid Gas Amount - Max. Conductivity = 2.5 µS/mm
• Halogen Acid Gas Amount - Min. pH = 4.3
• UK Regulation Compliance: UKCA Mark