FLUKE

手动泵

Hand Pumps

Pompa Tangan

Pam Tangan

ปั๊มมือ

hand-pumps

制造业

Manufacturing

manufacturing

Manufaktur

Pembuatan

การผลิต

Pumps

pumps

ปั๊ม

Fluke 700PTP-1 Pneumatic Pressure Pump 40bar

 The Fluke-700PTP-1 manual pneumatic test pump is capable of supplying pressures of up to 40 bar (600 psi). It is suitable for use with 700 series pressure modules or test gauges, and can be directly connected to the reference port consolidating two separate pieces when performing pressure calibration and testing. It can also be used with the 700 series pressure calibrators, which are ideal for calibrating pressure transmitters, pressure switches and pressure gauges up to 40 bar (600 psi).
The pump has ” NPT female connections to both the reference gauge or pressure module, and the unit under test.
Pump can be easily cleaned without disassembly
The vernier can be used as a stand-alone low pressure calibration source
Two pressure ports allowing simultaneous connection
Adjustable stroke length can be set to limit the pressure per stroke
Size: 220 x 122 x 89 mm
Weight: 467 g
Wetted materials: aluminium, silicon, neoprene, stainless steel, Buna-N


1//4 in NPT male to 1//4 in BSP female, 1 meter of hose, 2 x 1//8 in NPT male quick connects, 1//8 NPT female to 1//4 in BSP female & Seal Kit

FLUKE Pressure Pump, 1/8in NPT Connection, 1m Hose Length - 700 Series - 700PTP-1

Need a calibration tool to take the strain of tough testing? Put equipment through its paces with this FLUKE pressure pump. Its simple hand actuator works with just a squeeze, letting you get hands-on with your system's pressure control. There's a side-mounted knob that lets you precisely dial pressure up and down to breeze through fine-tuning. Setting the unit up for vacuum applications is fuss-free, thanks to its handy screw-operated function switch. Don't worry about pushing too hard, as the pump's adjustable stroke limit stops pressure increases before they damage your gear.
• Handles pressures up to 40 bar for use with heavy-duty applications
• Widely compatible 1/8in NPT for use with standard test gauges and pressure modules
• Comes with a 1m hose for flexible set-up
• Springs and seals are accessible without disassembly for easy cleaning


• Device calibration
• Manufacturing industry
• Pressure switches


How do I release pressure from this pump?

The component vents pressure through the exhaust valve on its adjustment dial. Simply loosen the valve's nut with a spanner to release pressure then tighten it again when you're done.


Pressure Calibration Pumps & Accessories 

<h3 class="md-block-header-three"><strong class="md-inline-bold">Fluke 700PTP-1 Pneumatic Pressure Pump 40bar</strong></h3><p class="md-block-unstyled"> The Fluke-700PTP-1 manual pneumatic test pump is capable of supplying pressures of up to 40 bar (600 psi). It is suitable for use with 700 series pressure modules or test gauges, and can be directly connected to the reference port consolidating two separate pieces when performing pressure calibration and testing. It can also be used with the 700 series pressure calibrators, which are ideal for calibrating pressure transmitters, pressure switches and pressure gauges up to 40 bar (600 psi).<br/>The pump has ” NPT female connections to both the reference gauge or pressure module, and the unit under test.<br/>Pump can be easily cleaned without disassembly<br/>The vernier can be used as a stand-alone low pressure calibration source<br/>Two pressure ports allowing simultaneous connection<br/>Adjustable stroke length can be set to limit the pressure per stroke<br/><strong class="md-inline-bold">Size:</strong> 220 x 122 x 89 mm<br/><strong class="md-inline-bold">Weight:</strong> 467 g<br/><strong class="md-inline-bold">Wetted materials:</strong> <em class="md-inline-italic">aluminium</em>, silicon, neoprene, stainless steel, Buna-N<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Supplied with</strong></h3><p class="md-block-unstyled">1//4 in NPT male to 1//4 in BSP female, 1 meter of hose, 2 x 1//8 in NPT male quick connects, 1//8 NPT female to 1//4 in BSP female &amp; Seal Kit</p><h3 class="md-block-header-three"><strong class="md-inline-bold">FLUKE Pressure Pump, 1/8in NPT Connection, 1m Hose Length - 700 Series - 700PTP-1</strong></h3><p class="md-block-unstyled">Need a calibration tool to take the strain of tough testing? Put equipment through its paces with this FLUKE pressure pump. Its simple hand actuator works with just a squeeze, letting you get hands-on with your system&#x27;s pressure control. There&#x27;s a side-mounted knob that lets you precisely dial pressure up and down to breeze through fine-tuning. Setting the unit up for vacuum applications is fuss-free, thanks to its handy screw-operated function switch. Don&#x27;t worry about pushing too hard, as the pump&#x27;s adjustable stroke limit stops pressure increases before they damage your gear.<br/>• Handles pressures up to 40 bar for use with heavy-duty applications<br/>• Widely compatible 1/8in NPT for use with standard test gauges and pressure modules<br/>• Comes with a 1m hose for flexible set-up<br/>• Springs and seals are accessible without disassembly for easy cleaning<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Applications</strong></h3><p class="md-block-unstyled">• Device calibration<br/>• Manufacturing industry<br/>• Pressure switches<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">How do I release pressure from this pump?</strong></h3><p class="md-block-unstyled">The component vents pressure through the exhaust valve on its adjustment dial. Simply loosen the valve&#x27;s nut with a spanner to release pressure then tighten it again when you&#x27;re done.<br/></p><p class="md-block-unstyled">Pressure Calibration Pumps &amp; Accessories </p>

<h3><strong>Fluke 700PTP-1 Pneumatic Pressure Pump 40bar</strong></h3>
<p>&nbsp;The Fluke-700PTP-1 manual pneumatic test pump is capable of supplying pressures of up to 40 bar (600 psi). It is suitable for use with 700 series pressure modules or test gauges, and can be directly connected to the reference port consolidating two separate pieces when performing pressure calibration and testing. It can also be used with the 700 series pressure calibrators, which are ideal for calibrating pressure transmitters, pressure switches and pressure gauges up to 40 bar (600 psi).<br>
The pump has ” NPT female connections to both the reference gauge or pressure module, and the unit under test.<br>
Pump can be easily cleaned without disassembly<br>
The vernier can be used as a stand-alone low pressure calibration source<br>
Two pressure ports allowing simultaneous connection<br>
Adjustable stroke length can be set to limit the pressure per stroke<br>
<strong>Size:</strong> 220 x 122 x 89 mm<br>
<strong>Weight:</strong> 467 g<br>
<strong>Wetted materials:</strong> <em>aluminium</em>, silicon, neoprene, stainless steel, Buna-N<br>
</p>
<h3><strong>Supplied with</strong></h3>
<p>1//4 in NPT male to 1//4 in BSP female, 1 meter of hose, 2 x 1//8 in NPT male quick connects, 1//8 NPT female to 1//4 in BSP female &amp; Seal Kit</p>
<h3><strong>FLUKE Pressure Pump, 1/8in NPT Connection, 1m Hose Length - 700 Series - 700PTP-1</strong></h3>
<p>Need a calibration tool to take the strain of tough testing? Put equipment through its paces with this FLUKE pressure pump. Its simple hand actuator works with just a squeeze, letting you get hands-on with your system's pressure control. There's a side-mounted knob that lets you precisely dial pressure up and down to breeze through fine-tuning. Setting the unit up for vacuum applications is fuss-free, thanks to its handy screw-operated function switch. Don't worry about pushing too hard, as the pump's adjustable stroke limit stops pressure increases before they damage your gear.<br>
• Handles pressures up to 40 bar for use with heavy-duty applications<br>
• Widely compatible 1/8in NPT for use with standard test gauges and pressure modules<br>
• Comes with a 1m hose for flexible set-up<br>
• Springs and seals are accessible without disassembly for easy cleaning<br>
</p>
<h3><strong>Applications</strong></h3>
<p>• Device calibration<br>
• Manufacturing industry<br>
• Pressure switches<br>
</p>
<h3><strong>How do I release pressure from this pump?</strong></h3>
<p>The component vents pressure through the exhaust valve on its adjustment dial. Simply loosen the valve's nut with a spanner to release pressure then tighten it again when you're done.<br>
</p>
<p>Pressure Calibration Pumps &amp; Accessories&nbsp;</p>


Pompa Tekanan Pneumatik Fluke 700PTP-1 40bar

Dilengkapi dengan

Pompa Tekanan FLUKE, Sambungan NPT 1/8 inci, Panjang Selang 1 m - Seri 700 - 700PTP-1

Aplikasi

Bagaimana cara melepaskan tekanan dari pompa ini?

Merek:	FLUKE
Model:	700PTP-1