This digital output module is part of the Modicon TM3 range of I/O expansion modules for Modicon controllers It consists in 16 N/O relay outputs 2 A. It is equipped with one removable screw terminal block and can be mounted on a symmetrical DIN rail 35 mm. This digital I/O module complement the embedded I/O on Modicon M221, M221 Book, M241 and M251 logic controllers. There is an insulation between output and internal logic at 2300V AC, outputs at 750V AC, output groups at 1500V AC. It is furnished with removable spring terminal for electrical connection with 5.08mm pitch adjustment for inputs and outputs. It is an IP20 rated product. Its dimensions are 23.6mm (Width) x 70mm (Depth) x 90mm (Height). It weighs 0.14kg. This product is certified by CE. It meets EN/IEC 61131-2 and EN/IEC 61010-2-201 standards. This module is compatible with Modicon M262, Modicon M241, Modicon M251 and Modicon M221 logic controller. It supports top hat type TH35-15, top hat type TH35-7.5 rail conforming to IEC 60715 and plate or panel with fixing kit mount. Modicon TM3 expansion modules have been designed with a simple interlocking assembly mechanism. A bus expansion connector is used to distribute data and the power supply when assembling the Modicon TM3 modules with logic controllers. Boost the performance of your controller with the Modicon TM3 I/O system specially designed for the Modicon M221, M241 and M251 logic controllers.
- Range of Product: Modicon TM3
- Product or Component Type: Discrete Output Module
- Range Compatibility:
- Modicon M241
- Modicon M251
- Modicon M221
- Modicon M262
- Discrete Output Type: Relay Normally Open
- Discrete Output Number: 16
- Discrete Output Logic: Positive or negative
- Discrete Output Voltage:
- 240 V AC for relay output
- 30 V DC for relay output
- Discrete Output Current: 2000 mA for relay output
- Complementary:
- Discrete I/O Number: 16
- Current Consumption:
- 0 mA at 24 V DC via bus connector (at state off)
- 75 mA at 24 V DC via bus connector (at state on)
- Response Time: 10 ms (turn-on), 5 ms (turn-off)
- Mechanical Durability: 20,000,000 cycles
- Minimum Load: 10 mA at 5 V DC for relay output
- Local Signalling: 1 LED per channel (green) for output status
- Electrical Connection: 10 x 1.5 mm² removable screw terminal block with pitch 3.81 mm adjustment for outputs
- Maximum Cable Distance Between Devices: Unshielded cable: <30 m for relay output
- Insulation:
- Between output and internal logic at 2300 V AC
- Between outputs at 750 V AC
- Between output groups at 1500 V AC
- Marking: CE
- Mounting Support:
- Top hat type TH35-15 rail conforming to IEC 60715
- Top hat type TH35-7.5 rail conforming to IEC 60715
- Plate or panel with fixing kit
- Dimensions:
- Height: 90 mm
- Depth: 84.6 mm
- Width: 27.4 mm
- Net Weight: 0.145 kg
- Environment:
- Standards: IEC 61131-2
- Product Certifications: cULus, CE, UKCA, RCM, EAC, cULus HazLoc
- Resistance to Electrostatic Discharge: 8 kV in air, 4 kV on contact conforming to IEC 61000-4-2
- Resistance to Electromagnetic Fields:
- 10 V/m 80 MHz...1 GHz
- 3 V/m 1.4 GHz...2 GHz
- 1 V/m 2 GHz...3 GHz
- Resistance to Magnetic Fields: 30 A/m 50/60 Hz conforming to IEC 61000-4-8
- Resistance to Fast Transients: 2 kV for relay output conforming to IEC 61000-4-4
- Surge Withstand: 1 kV I/O common mode conforming to IEC 61000-4-5 DC
- Resistance to Conducted Disturbances: 10 V 0.15...80 MHz conforming to IEC 61000-4-6
- Electromagnetic Emission: Radiated emissions conforming to IEC 55011
- Ambient Air Temperature for Operation:
- -10…35 °C vertical installation
- -10…55 °C horizontal installation
- Ambient Air Temperature for Storage: -25…70 °C
- Relative Humidity: 10…95 %, without condensation (in operation and storage)
- IP Degree of Protection: IP20 with protective cover in place
- Pollution Degree: 2
- Operating Altitude: 0...2000 m
- Storage Altitude: 0…3000 m
- Vibration Resistance:
- 3.5 mm at 5…8.4 Hz on DIN rail, 3 gn at 8.4…150 Hz on DIN rail
- 3.5 mm at 5…8.4 Hz on panel, 3 gn at 8.4…150 Hz on panel
- Shock Resistance: 15 gn for 11 ms