Schneider Electric LXM28EU07M3X Motion Servo Drive, Lexium 28, Single and Three Phase, 200 to 240V, 750W, Ethercat

• Range of Product: Lexium 28
• Device Short Name: LXM28E
• Product or Component Type: Motion Servo Drive
• Format of the Drive: Compact Housing
• Line Current:
• 6 A 181.8% at 220 V, Single Phase
• 6 A 160.6% at 220 V, Three Phase
• Network Number of Phases: Single or Three Phases
• [Us] Rated Supply Voltage:
• 200...240 V (-10...15%) for Three Phase
• 200...240 V (-20...15%) for Single Phase
• Supply Voltage Limits:
• 200…255 V Three Phase
• 170…255 V Single Phase
• Supply Frequency: 50/60 Hz (-5...5%)
• Network Frequency: 47.5...63 Hz
• EMC Filter: Without EMC Filter
• Continuous Output Current: 4.5 A at 16 kHz
• Output Current 3s Peak: 13.5 A at 220 V
• Continuous Power: 750 W at 220 V
• Nominal Power: 0.75 kW at 220 V 16 kHz
• Switching Frequency: 16 kHz
• Overvoltage Category: III
• Maximum Leakage Current: 1.3 mA
• Output Voltage: <= Power Supply Voltage
• Electrical Isolation: Between Power and Control
• Type of Cable: Shielded Motor Cable (Temperature: 0…55 °C), Copper
• Electrical Connection:
• Spring Terminal, Clamping Capacity: 0.82...1 mm², AWG 18 (L1-L2)
• Spring Terminal, Clamping Capacity: 0.82...1 mm², AWG 18 (R, S, T)
• Spring Terminal, Clamping Capacity: 0.82...1 mm², AWG 18 (U, V, W, PE)
• Spring Terminal, Clamping Capacity: 0.82...1 mm², AWG 18 (PA/+, PBe)
• Discrete Input Number: 8 Programmable (CN1), 2 Fast Capture (CN1), 1 Safety Function STO (CN9)
• Discrete Input Voltage: 24 V DC for Logic
• Discrete Input Logic: Positive or Negative (CN1)
• Discrete Output Number: 5 Logic Output (CN1) at 12...24 V DC, 1 Pulse Train Output (PTO) (CN1)
• Discrete Output Voltage: 12...24 V DC
• Discrete Output Logic: Positive or Negative (CN1)
• Control Signal Type: Servo Motor Encoder Feedback CN2
• Protection Type: Against Reverse Polarity, Short-Circuits, Overcurrent, Overvoltage, Undervoltage, Overheating, Overload, Overspeed (Motor)
• Safety Function: STO (Safe Torque Off), Integrated
• Safety Level:
• SIL 2 conforming to IEC 61800-5-2: 2007
• SIL 2 conforming to IEC 61508-1: 2010
• PL d/category 3 conforming to ISO 13849-1: 2008
• SIL 2 conforming to ISO 13849-1: 2009/AC
• SIL 2 conforming to IEC 60204-1: 2006
• SIL 2 conforming to IEC 60204-1: 2009/A1
• SIL 2 conforming to IEC 60204-1: 2010/AC
• SIL 2 conforming to IEC 62061: 2012
• Communication interface: EtherCAT, Integrated
• Connector Type: RJ45 (CN4) for EtherCAT
• Method of Access: Slave
• Transmission Rate: 100 Mbit/s for EtherCAT
• Physical Interface: RS485 for Modbus Serial Line Slave
• Status LED: 1 LED (Red) DC Bus Energized, 1 LED (Multi-colour) N.RUN, 1 LED (Multi-colour) N.ERR, 2 LEDs (Green) Link (Link Status), 2 LEDs (Yellow) Activity
• Signalling Function: Servo Status and Fault Codes, Five 7-Segment Display Units
• Marking: CE, CULus
• Type of Cooling: Fan
• Operating Position: Vertical
• Product Compatibility: Servo Motor BCH2 (130 mm, 1 Motor Stacks) at 500 W, Servo Motor (80 mm, 2 Motor Stacks) at 750 W, Servo Motor (130 mm, 1 Motor Stacks) at 600 W
• Width: 55 mm
• Height: 150 mm
• Depth: 146 mm
• Net Weight: 1 kg
• Output current 3s peak 2: 13.5 A at 220 V
• Output current 3s peak 3: 13.5 A at 220 V
• Electromagnetic Compatibility: Conducted Emission - Test Level: Level 3 Category C3 Conforming to IEC 61800-3
• Standards: IEC 61800-5-1
• Product Certifications: CSA, CE, CULus
• IP Degree of Protection: IP20
• Vibration Resistance: 3M4 Amplitude = 3 mm (f = 9…200 Hz) Conforming to IEC 60721-3-3
• Shock Resistance: 10 gn, Type I Conforming to IEC 60721-3-3
• Relative Humidity: 5…95% without Condensation
• Ambient Air Temperature:
• For Operation: 0…55 °C
• For Storage: -25…65 °C
• Operating Altitude:
• <= 1000 m without Derating
• > 1000...2000 m 1% per 100 m