Cable Length:
Side 1
- Mounting method: inserted
- Family construction form: RJ45
- No. of poles: 4
Electrical Data | Supply
- Operating voltage DC max.: 60 V
- Current operating per contact max.: 1.5 A
Industrial Communication
- Transfer parameters: CAT5e, Class D (ISO/IEC 11801:2002), (EN 50173-1)
- Data transmission rate max.: 100 MBit/s
Industrial Communication | Ethernet Functionality
Diagnostics
- Status indication LED: no
Device Protection | Electrical
- Degree of protection (EN IEC 60529): IP20
- Pollution Degree: 3
- Rated surge voltage: 1 kV
- Material group (IEC 60664-1): I
Mechanical Data
- Contour for corrugated hose: without
Mechanical Data | Material Data
- Material housing: PUR
- Locking material: PA
Mechanical Data | Mounting Data
- Locking techniques: Snap-in connector
Environmental Characteristics | Climatic
- Operating temperature min.: -25 °C
- Operating temperature max.: 85 °C
- Additional condition temperature range: depending on cable quality
Important Installation Notes
- Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g., by using cable ties.
- Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as excessive bending forces could compromise the IP protection class.
Cable Data
- Wire arrangement: white, yellow, blue, orange
General Data | Cable
- Cable identification: 796
- Jacket color: green
- Type of certificate: cURus
Structure | Cable
- Amount stranding: 1
- Stranding: 4 wires around core filler twisted
- Cable shielding (type): copper braid, tinned
- Cable shielding (coverage): 85%
- Banding: Fleece, foil
- Filler: yes
Mechanical Data | Cable
- Cable weight: 69.3 g/m
- Material jacket: PUR
- Shore hardness jacket: 89 Shore A
- Freedom from ingredients (jacket): lead-free, cadmium-free, CFC-free, halogen-free, silicone-free
- Outer diameter (jacket): 6.7 mm
- Tolerance outer diameter (sheath): ± 5%
- Material inner jacket: FRNC
- Color (inner jacket): natur
- Material wire insulation: PE
- Amount wires: 4
- Outer diameter insulation: 1.4 mm
- Outer diameter tolerance core insulation: ± 5%
- Shore hardness wire insulation: 65 Shore D
- Ingredient freeness wire insulation: lead-free, CFC-free, halogen-free
- Amount strands (wire): 7
- Diameter of single wires: 22 AWG
- Conductor cross-section (wire): 22 AWG
- Material conductor wire: Stranded copper wire, bare
Electrical Data | Cable
- Nominal voltage AC max.: 300 V
- Current load capacity (standard): to DIN VDE 0298-4
- Current load capacity min. wire: 4.8 A
- Characteristic impedance: 100 Ω ± 15% @ 100 MHz
- Electrical resistance line constant wire: 55 Ω/km @ 20 °C
- AC withstand voltage (wire - wire): 2 kV @ 60 s
- Electrical capacity line constant (wire - wire): 50,000 pF/km
- Power frequency withstand voltage (wire - jacket): 2 kV @ 60 s
- AC withstand voltage (wire - shield): 2 kV @ 60 s
- Isolation resistance: 5000 MΩ × km
Temperature Range | Cable
- Min. operating temperature (static): -40 °C
- Max. operating temperature (fixed): 80 °C
- Operating temperature min. (dynamic): -30 °C
- Operating temperature max. (dynamic): 70 °C
Resistances | Cable
- Flame resistance: IEC 60332-2-2 | UL 1581 § 1090 | UL 1581 § 1100 FT2
- Chemical resistance: Good, application-related testing
- Gasoline resistance: Good, application-related testing
- Oil resistance: DIN EN 60811-404 | Good, application-related testing
Installation | Cable
- Bending radius (fixed): 5 x Outer diameter
- Bending radius (dynamic): 12 x Outer diameter
- No. of bending cycles (C-track): 3 Mio. @ 25 °C
- Traversing distance (C-track): 5 m @ 25 °C
- Travel speed (C-track): 3.3 m/s @ 25 °C
- No. of torsion cycles: 1 Mio. @ 25 °C
- Torsion stress: ± 180 °/m