Mr Mckenic 9-in-1 Technology Oil 450g 8885000350025

Mr McKenic® – 9-in-1 Technology Oil is a multi-functional product with a wide variety of applications with its lubricating, corrosion-inhibiting, penetrating and cleaning properties. An effective solution in many situations from lubricating moving parts to maintenance of equipment, Mr McKenic® – 9-in-1 Technology Oil is an essential product in every tool box.

Features:

• Low Surface Tension
• High Penetration Power
• Displaces Moisture & Prevents Short-Circuit
• Prevents & Remove Rust
• Lubricates
• Prevents Overheating
• Non-Flammable
• Odourless
• Withstands Temperature
• Cleans Stubborn Stains

Direction for use:

Always apply on a piece of clean cloth and test on a small area before applying on non-metal, painted or any other sensitive surfaces.

For Aerosol Can Packing:

• Shake Can well before use.
• Fit straw onto nozzle to reach inaccessible areas.
• To lubricate, spray directly onto targeted areas.
• To treat rusted parts, spray directly to saturate target areas. Allow to soak for 5-10 minutes.
• Agitate if necessary.
• To displace moisture, spray onto contact points.
• To prevent rust, first treat rusted areas, then re-spray directly onto target area to leave a layer of protection. Do not wipe off.
• Use short bursts instead of a long continuous spray.

For Bulk Packing:

• Product can be applied using soak, spray and brush methods. Put on Personal Protective Equipment.
• Pour Mr McKenic® – 9-in-1 Technology Oil slowly into a chemical-resistant container or sprayer.
• To lubricate, either use a sprayer to spray directly onto target areas or soak moving components for 1-2 mins before bringing them out to drip-dry. Do not wipe off.
• To treat rusted parts, allow rusty components to soak for 5-10 mins. Agitate rusted surface by means of a copper brush. Wipe off with a clean cloth. Repeat if necessary.
• To prevent rust, allow components to soak for 1-2 mins before bringing them out to drip-dry. Do not wipe off.