Introduction:

The Jabsco 53081-2003 is a bronze Flexible Impeller pump with a Nitrile Impeller, Nitrile/Carbon/Ceramic Mechanical Seal, 1-1/2 Inch BSP threaded Ports, coupled to a 1450 RPM, 230 Volts, 50 HZ Motor. This Pump has an integral fluid reservoir to protect pump against dry running for up to 30 minutes. The motor is 4 Pole, single phase, 550 Watt, AC. Face and Foot mounting B3-B14. Enclosure IP55, Frame size 80 all IEC 72 standard. Fitted with manual reset thermal overload. Jabsco bronze bodied AC motor pumps are self-priming, portable and versatile, making them ideal for a wide range of applications wherever AC power is available.

Features :

Pump Body:Bronze

Impeller: Nitrile

Shaft Seal: Nitrile/Carbon/Ceramic Mechanical Seal

Port Size: Ports are 1-1/2 Inch BSP threaded

Product Specs :

Self primes from dry up to 9.8 feet

Flows up to 21 gal per minute

Pressure up to 29 psi

Handles hard or soft solids

Tolerates abrasive wear

Non pulsating flow

Handles viscosities up to 500 centiPoise

Uses Continuously Rated Motor

Dry running capability for 30 minutes without damage to pump

Others:

• Connections: 1½” BSP internal threaded ports
• Dimensions: 330mm long, 250mm wide, 240mm high
• Output: up to 80 litres/minute
• Built-in dry-running protection for up to 30 minutes after initial prime
• Rapid self-priming from dry up to 3m
• Will handle hard or soft solids
• Corrosion resistant bronze body, stainless steel shaft
• Carbon-ceramic mechanical shaft seal
• Simple, fully serviceable design with few wearing parts
• Continuously Rated Motor