simatherm Bearing BInduction Heater IH 210, 400-460V
Heat large rolling bearings up to 300 kg

The most powerful table-top heater
The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing.

· For rolling bearings weighing up to 300 kg
· Extremely simple operation thanks to the sliding yoke
· Available for voltages of 200, 400–480 and 500–575 V
· Induction coil outside of the housing, shortens the heating times and reduces energy consumption
· Particularly compact design - including the yokes only 75 kg in weight
· Automatic demagnetization
· 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy
· For workpieces with an inner diameter of 60 to 640 mm
· Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy
· 3 year manufacturer warranty

Technical data for simather IH 210

Designation: Heater for large workpieces
Voltage V / Hz / power:
- 400 V / 50 Hz / 10.0 kVA
- 440–480 V / 50–60 Hz / 11.5 kVA
- 575 V / 60 Hz / 10.4 kVA
Workpiece:
- Maximum weight: 300 kg
- Bore diameter: From 60 mm inner diameter to 640 mm outer diameter
Temperature control:
- Range: 0 – 250°C
- Magnetic probe: yes, type K
- Accuracy (electronic): ± 3°C
Time control:
- Range: 0 – 60 minutes
- Accuracy: ± 0.01 seconds
Maximum temperature (approx.): 250°C
Thermometer mode: yes
Bearing temperature mode: yes
Power level: 5 levels / 20-40-60-80-100%
Automatic demagnetization / residual magnetism: yes / < 2A/cm
Suitable for heating sealed bearings: yes
Suitable for heating pre-greased bearings: yes
Error guide codes: yes
Thermal magnetic flux: yes
Maximum magnetic flux: 1.5 T
Control panel: Keyboard with LED-display
Size of the operating area (WxH): 250 x 250 mm
Coil diameter: 135 mm
Measurements (LxWxH): 600 x 350 x 420 mm
Overall weight including yokes: 75 kg
Number of standard yokes: 2
Standard yokes:
- 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm
- 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm
Core cross-section: 70 x 70 mm
Yoke storage: yes, integrated
Cooling fan: optional
Sliding yoke: yes
Housing material: aluminum

Scope of delivery
· 1x simatherm IH 210
· 1x User manual
· 1x Temperature probe
· 1x Power cord
· 1x Protective gloves
· 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm
· 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm

Optional: · Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm

Industry target groups and applications

Fabrication and assembly
· General mechanical engineering
· Gearbox construction (vehicles and industry)
· Pumps
· Hydraulic equipment
· Electric motor construction
· Conveyor and conveying systems

General operations maintenance
· Metal processing industry
· Paper and cardboard factories
· Textile industry
· Larger printing plants
· Food industry
· Building services
· Vehicles (buses, trucks, rail vehicles)
· Construction machinery
· Forklifts, storage equipment/lifting devices

Typical components which can be heated with the IH 210
· Rolling bearings
· Gears
· Gear rims
· Shrink rings
· Pistons
· Bushings
· Sleeves
· Clutch parts

Materials which can be heated well
· Structural steel
· Ball bearing steel
· Grey cast iron
· Cast steel

*Lead time: 3 to 4 weeks upon order confirmation