Schneider Electric RMCN22BD Isolated Analog Converter, Harmony Analog, 0…10V or 4...20mA to 0…10V or 4...20mA

This voltage/current converter is part of the range of Harmony Analog interfaces. This cost effective converter converts a 0 to 10 V signal to a 4 to 20mA signal or vice versa. Its supply voltage is 24V DC, non isolated. It also allows the connection distance between a sensor and the measurement acquisition device to be increased. Conforming to IEC standards, UL and CSA certified, this converter is suitable for universal use.

Main

• Range of Product: Harmony Analog
• Product or Component Type: Voltage/Current Converter
• Analogue Input Type:
• Current: 4...20 mA
• Voltage: 0...10 V DC
• Analogue Output Type:
• Current: 4...20 mA (≤ 500 Ohm by cabling)
• Voltage: 0...10 V (≥ 100 kOhm by cabling)

Complementary

• Protection Type:
• Short-Circuit Protection on Output
• Overvoltage Protection on Output (+/- 30 V)
• Reverse Polarity Protection on Output
• Abnormal Analogue Output Voltage: -15...0 V (No Input or Input Wire Broken)
• Abnormal Analogue Output Current: 4…30 mA (No Input or Input Wire Broken)
• Rated Supply Voltage [Us]: 24 V DC +/- 20 % (Non-isolated)
• Current Consumption:
• <= 40 mA for Voltage Output
• <= 60 mA for Current Output
• Local Signalling: LED (Green) for Power ON
• Measurement Error: +/- 5 % of Full Scale at 20 °C (Temporary Performance Degradation when Subject to Electromagnetic Interference)
• Repeat Accuracy:
• +/- 0.2 % Full Scale at 20 °C
• +/- 0.6 % Full Scale at 60 °C
• Temperature Coefficient: 200 ppm/°C
• Clamping Connection Capacity:
• 1 x 2.5 mm²
• 2 x 1.5 mm²
• Tightening Torque: 0.6…1.1 N.m
• Marking: CE
• Surge Withstand: 0.5 kV during 1.2/50 µs conforming to IEC 61000-4-5
• Rated Insulation Voltage [Ui]: 2 kV
• Fixing Mode:
• By Screws (Mounting Plate)
• Clip-on (35 mm Symmetrical DIN Rail)
• Safety Reliability Data:
• MTTFd = 73.2 years
• B10d = 67582
• Net Weight: 0.12 kg

Environment

• Standards:
• IEC 60584-1
• IEC 60947-1
• Product Certifications:
• GL
• CSA
• UL
• IP Degree of Protection:
• IP20 (Terminal Block)
• IP50 (Housing)
• Fire Resistance:
• 850 °C conforming to IEC 60695-2-1
• 850 °C conforming to UL
• Shock Resistance: 50 gn for 11 ms conforming to IEC 60068-2-27
• Vibration Resistance: 5 gn (f= 10…100 Hz) conforming to IEC 60068-2-6
• Resistance to Electrostatic Discharge:
• 6 kV (in contact) conforming to IEC 61000-4-2 level 3
• 8 kV (in air) conforming to IEC 61000-4-2 level 3
• Resistance to Fast Transients:
• 1 kV (on input-output) conforming to IEC 61000-4-4
• 2 kV (on power supply) conforming to IEC 61000-4-4
• Disturbance Radiated/Conducted:
• CISPR 22 group 1 - class B
• CISPR 11
• Ambient Air Temperature:
• For Storage: -40…85 °C
• For Operation:
• 0…50 °C (Mounting Side by Side)
• 0…60 °C (2 cm Spacing)
• Pollution Degree: 2 conforming to IEC 60664-1