Schneider Electric ATS01N212RT Soft Starter for Asynchronous Motor, Altistart 01, ATS01, 12A, 460 to 480V

Singapore

Search Keyword, Item or Model

Press

to jump to the search box

Shopping List

Cart

MYR - RM

Home

All Categories

Schneider Electric ATS01N212RT Soft Starter for Asynchronous Motor, Altistart 01, ATS01, 12A, 460 to 480V

View Brand

Schneider Electric ATS01N212RT Soft Starter for Asynchronous Motor, Altistart 01, ATS01, 12A, 460 to 480V

Brand:	SCHNEIDER ELECTRIC
Model:	ATS01N212RT

Technical Data Sheets

Product Datasheet

Instruction sheet

Catalogue

Specifications

View other Soft Starters dimensions or variations

Range Of Product

Altistart 01

Network Frequency

47.5...63 Hz

Standards

EN/IEC 60947-4-2

Ip Degree Of Protection

IP20

Pollution Degree

2 conforming to EN/IEC 60947-4-2

Relative Humidity

5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3

Ambient Air Temperature For Operation

-10…40 °C (without derating) 40…50 °C (with current derating of 2 % per °C)

Ambient Air Temperature For Storage

-25…70 °C conforming to EN/IEC 60947-4-2

Product Certifications

UL CSA CCC C-Tick GOST

Supply Voltage Limits

414…528 V

Supply Frequency

50...60 Hz - 5...5 %

Device Short Name

ATS01

Product Or Component Type

Soft starter

Utilisation Category

AC-53B conforming to EN/IEC 60947-4-2

Compatibility Code

ATS01N2

Operating Altitude

<= 1000 m without derating > 1000 m with current derating of 2.2 % per additional 100 m

Tightening Torque

1.9…2.5 N.m 0.5 N.m

Marking

Electromagnetic Compatibility

Conducted and radiated emissions level B conforming to CISPR 11 Conducted and radiated emissions level B conforming to IEC 60947-4-2 Damped oscillating waves level 3 conforming to IEC 61000-4-12 Electrostatic discharge level 3 conforming to IEC 61000-4-2 EMC immunity level 3 conforming to EN 50082-1 EMC immunity level B conforming to EN 50082-2 Harmonics level 3 conforming to IEC 1000-3-2 Harmonics level 3 conforming to IEC 1000-3-4 Immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6 Immunity to electrical transients level 4 conforming to IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 Micro-cuts and voltage fluctuation conforming to IEC 61000-4-11 Voltage/current impulse level 3 conforming to IEC 61000-4-5

[Uc] Control Circuit Voltage

Built into the starter

Motor Power Hp

7.5 hp, 3 phases at 460...480 V

Minimum Switching Current

10 mA at 6 V DC for relay outputs

Operating Position

Vertical +/- 10 degree

Product Specific Application

Simple machine

Shock Resistance

15 gn for 11 ms conforming to EN/IEC 60068-2-27

Vibration Resistance

1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6

[Us] Rated Supply Voltage

460...480 V - 10...10 %

Product Destination

Asynchronous motors

Output Voltage

<= power supply voltage

Discrete Input Voltage

24...40 V

Assembly Style

With heat sink

Current Consumption

60 A at nominal load

Maximum Switching Current

Relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load Relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load

Electrical Connection

4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit Screw connector - rigid without cable end 1 0.5...2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit Screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit Screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit 4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit Screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit 4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit Screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit

Network Number Of Phases

3 phases

Function Available

Integrated bypass

Discrete Input Logic

Positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA

Discrete Output Voltage

24 V (voltage limits: 6...30 V) open collector logic

Discrete Output Current

2 A DC-13 3 A AC-15

Power Dissipation In W

4 W at full load and at end of starting 124 W in transient state

Display Type

1 LED (green) for starter powered up 1 LED (yellow) for nominal voltage reached

Type Of Start

Start with voltage ramp

Discrete Input Type

Logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm

Discrete Output Type

Open collector logic LO1 end of starting signal Relay outputs R1A, R1C NO

Icl Starter Rating

12 A

Starting Time

Adjustable from 1 to 10 s

Starting Torque

30...80 % of starting torque of motor connected directly on the line supply

Deceleration Time Symb

Adjustable from 1 to 10 s

Product Description

RM 1,613.07

Quantity:

This item is sold by

Schneider Electric