Design to bond PVC pipes and fitting, cable conduits and PVC articles

Country of origin: Malaysia
Weight: 500gm per can

Technical specifications:

• Color: Crystal clear
• Base: Thermoplastic polymer
• Solvents: Blend of hydrocarbon solvents
• Appearance: Liquid state
• Non-volatile content (Total solids): 22.0 ± 1.0%
• Viscosity @ Brookfield, 30 °C: 360cps – 400cps
• Specific gravity, 30 °C: Tested to 0.90 ± 0.02 at 30 °C
• Flammability: Contains solvents which are highly flammable

Features:

• Chemical Reaction: Creates a chemical reaction that essentially fuses the PVC pieces together, the PVC surfaces are partially dissolved and merged into one piece as the PVC pipe cement dries and hardens
• Fast Setting: Sets quite quickly, an important advantageous when working on a project but also requires precision as the user has little time to adjust once the pieces are joined. Generally, the joint is ready to handle pressure in 15 minutes to 2 hours, and for full strength loading, the recommendation is to wait for 24 hours
• Waterproof: Once cured, PVC cement creates a waterproof seal, making it perfect for use in plumbing applications where the joined pipes will carry water
• Strength: The bond created by PVC cement is extremely strong due to the chemical reaction that essentially turns the two pieces into one, making this connection highly durable
• Application: Typically applied with a brush or dauber that's built into the lid of the cement can; it is recommended that both surfaces to be joined should be covered in cement
• Preparation: Before applying PVC cement, it's usually recommended to clean and then apply a primer to the surfaces to be joined as the primer helps to soften the PVC and allows for a better bond

​​​​​​​#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #Jebsen #PVCPipeCement #GRPSdnBhd