Physical Characteristics
- Conductor Size: 23 AWG
- Conductor Material: Solid Bare Copper
- Insulation Material: PO ‐ Polyolefin
- Number of Pairs: 4 Pairs
- Overall Cabling Filler: Central Spline
- Shield: Aluminium Foil ‐ Polyester Tape
- Shield Drain Wire: Solid Tinned Copper
- Inner Jacket: LSZH ‐ Low Smoke Zero Halogen
- Armor: Galvanized Steel Wire Braid Armor (SWB)
- Outer Jacket: LSZH ‐ Low Smoke Zero Halogen
- Inner Jacket Ripcord: Optional
- Outer Jacket Ripcord: Optional
Electrical Characteristics
- Max. Conductor DCR @ 20°C: 9.38 Ω/100m
- DCR Unbalance @ 20°C: Max. 5%
- Nom. Mutual Capacitance @ 1KHz: 5.6 nF/100m
- Max. Capacitance Unbalance: 330 pF/100m
- Characteristic Impedance: 100 ± 15 Ω
- Max. Delay @ 100MHz: 538 ns/100m
- Max. Delay Skew: 45 ns/100m
- Max. Operating Voltage: 300V RMS
Mechanical Characteristics
- Operating Temperature Range: -20°C to +75°C
- Bulk Cable Weight: 141 kg/km
- Max. Recommended Pulling Tension: 110 N
- Nom. Diameter: 10.5 mm
- Min. Bending Radius (Install): 84 mm
- Suitability: Indoor and Outdoor
Other Properties
- UV Resistance: Yes
- Oil Resistance: Yes
- Halogen Content per IEC 60754-1: ≤ 5 mg/g
- Flame Retardant: IEC 60332-3-24
- Acid Gas Emission pH per IEC 60754-2: ≥ 4.3
- Acid Gas Emission Conductivity per IEC 60754-2: < 10 μs/mm
- Smoke Density as per IEC 61034-2: ≥ 60% Light Transmittance
Standards Compliance
- ISO/IEC 11801: Cat 6
- IEC 61156-5: Cat 6
- TIA/EIA 568-C.2: Cat 6