Carbon Steel Hand Taps with Straight Flutes are designed for general purpose hand tapping operations where ground thread accuracy and performance is not required. They can also be used for rethreading damaged threads. Carbon steel Hand Taps are the most cost effective threading tap available. It is with Individual & in Sets (Set of 3 Pieces) Which is Know as Taper Tap, Plug Tap, Bottom Tap.Supplied in All Thread Forms , These are also called Cut Thread Alloy Taps.
- Hand taps for non abrasive material up to 900 N/mm² tensile strength
- The taps are suitable for abrasive steels up to 1200 N/mm²
- Hand taps are the most cost effective
- All taps are also suitable for through and blind holes
- Durable and fine thread hand tap
- Brand: ETH
- Product Type: Hand Tap
- Material: Carbon Steel
- Flute Length: 10 mm
- Pitch Diameter: 0.35 mm
- Suitable For: Blind Holes
- Length: 4.6 cm
- Width: 1 cm
- Height: 1 cm
- SKU: 631110 (3.0 x 0.35 mm)
- SKU: 631112 (4.0 x 0.5 mm)
- SKU: 631113 (4.5 x 0.5 mm)
- SKU: 631114 (5.0 x 0.5 mm)
- SKU: 631115 (5.5 x 0.5 mm)
- SKU: 631115A (5.5 x 0.75 mm)
- SKU: 631116 (6.0 x 0.75 mm)
- SKU: 631117 (7.0 x 0.75 mm)
- SKU: 631118 (8.0 x 1 mm)
- SKU: 631119 (8.0 x 0.75 mm)
- SKU: 631122 (10 x 1.25 mm)
- SKU: 631123 (10 x 1 mm)
- SKU: 631127 (12 x 1.5 mm)
- SKU: 631128 (12 x 1.25 mm)
- SKU: 631129 (12 x 1 mm)
- SKU: 631129A (13 x 1.5 mm)
- SKU: 631129B (14 x 1.25 mm)
- SKU: 631130 (14 x 1.5 mm)
- SKU: 631131 (14 x 1 mm)
- SKU: 631132 (15 x 1.5 mm)
- SKU: 631134 (16 x 1.5 mm)
- SKU: 631135 (16 x 1 mm)
- SKU: 631136 (17 x 1 mm)
- SKU: 631136A (17 x 2.0 mm)
- SKU: 631137 (17 x 1 mm)
- SKU: 631138 (18 x 2 mm)
- SKU: 631139 (18 x 1.5 mm)
- SKU: 631140 (18 x 1 mm)
- SKU: 631140A (19 x 1.5 mm)
- SKU: 631140B (19 x 2.5 mm)
- SKU: 631141 (20 x 2 mm)
- SKU: 631142 (20 x 1.5 mm)
- SKU: 631145A (23 x 1.5 mm)
- SKU: 631146A (23 x 1.5 mm)
- SKU: 631147 (24 x 2 mm)
- SKU: 631147A (24 x 2 mm)
- SKU: 631148 (24 x 1.5 mm)
- SKU: 631149 (24 x 1 mm)