Ergomat Nitril ESD/Conductive Mat Black ENC

Nitril ESD/Conductive is a perfect ergonomic mat for critical environments requiring a high degree of static control to protect sensitive products or equipment. In situations with excessive fluid volume, or the need to promote air flow, Nitril ESD/Conductive can be die-cut to accommodate these requirements. This mat is typically used in electronics assembly and semiconductor production among others. Grounding cords can also be supplied for added protection. A mat for usage in the electronics industry or for areas where static control is crucial due to sensitive equipment.

Features:

• Virgin nitrile rubber
• Electrical resistance 5x104Ω–1. 5x105Ω
• Always bevelled on every edge
• Service temperature range -40⁰C to 90⁰C
• ISO Clean room Class 5 (Class 100) rated
• Autoclavable 60 cm x 90 cm
• Can be pressure washed to 1,500 PSI
• pH resistance from 5-10
• Can be provided with die-cut holes for liquid and air flow
• Silicone and latex free
• Grounding cords can be supplied for added protection

Benefits:

• Ergonomic: Designed to stimulate circulation in feet, legs and lower back. Circulation is stimulated by the unique, patented surface profile of Ergomat mats, which forces muscular response
• Bevelled Edges: Always molded with bevels. Yellow bevels can be added. Bevels will never curl up eliminating trip hazards
• ISO Clean room Certified: Nitril mats are ISO Clean room Class 5 (Class 100) rated
• Conductive Option: Engineered with enhanced static control. Electrical resistance : 5x104 Ω – 1.5x105Ω
• Hole Can Be Added: In situations with excessive fluid volume or the need to promote air flow, holes can be added

Specification:

• Brand: Ergomat
• Product Type: ESD/Conductive Mat
• Material: Nitrile
• Colour: Black
• Weight: 3.3 kg +/- 50 g
• Length (without Bevelled Edges): 91.4 cm +/- 1%
• Width (without Bevelled Edges): 60 cm +/- 1%
• Thickness: 11 mm
• Density: 1,260 kg/m3
• Hardness: 50-60 Sh A
• Friction: 173 N
• Abrasion Load =5N: 63 mm3
• Elongation at Break: 4
• Tearing Strength: 26 N/mm
• Electrical Resistance Surface Point to Point: %50 RH 5 x 10 4 – 1.5 x 10 5 ohm
• Thermal Conductance: 3.3 W/m/°C
• Thermal Properties:
• Minimum Use: - 40°C
• Maximum Use: 90°C
• Maximum Short Duration: 600°C
• Flame Point: 400°C 
• UV Resistance: Inferior
• Clean room Application: ISO Class 5 (100)