DEVCON 10110 PLASTIC STEEL PUTTY (A)

Plastic Steel is the original metal-filled epoxy putty used for hundreds of routine maintenance, production, and tooling applications. Patch and metal repair areas where welding or brazing would be undesirable or impossible.

Key Features

• Bonds to most metals, concrete and some plastics
• Cures at room temperature and forms a tough durable metallic mass that can be drilled, tapped, machined or painted
• Excellent resistance to oil, gasoline, water and many chemicals
• Listed under NSN Stock #8030-00-903-6545; #8030-00-962-4430
• Open Time: 45 minutes
• Color: Gray
• Mix Ratio: 2.5:1

Areas of application

• Patching and repairing areas where welding or brazing would be undesirable or impossible
• Repair of worn or fatigued metals
• Patching of castings
• Rebuilding pump and valve bodies
• Rebuilding bearing journals and races

Specification

• Physical State Appearance: Paste
• Color: Dark Gray
• Odor: Slight. odor
• Boiling Point: >500°F (260°C)
• Melting Point: Not determined
• Specific Gravity: 2.8
• Solubility: negligible
• Vapor Density: >1 (air = 1)
• Vapor Pressure: 0.03 mmHg @171°F
• Percent Volatile: 0
• Evaporation Rate: <<1 (butyl acetate = 1)
• pH: Neutral
• Molecular Formula: Mixture
• Molecular Weight: Mixture
• Flash Point: >400°F (204.4°C)
• Flash Point Method: Pensky-Martens Closed Cup
• Lower Flammable/Explosive Limit: Not determined
• Upper Flammable/Explosive Limit: Not determined
• Auto Ignition Temperature: Not determined
• VOC Content: 0 g/L