10 Litres HDPE Jerrican C/W Pouring Spout & Vent Hole

Country of Origin: 100% Made in Taiwan

Model: FB86110

Capacity: 10-Litres

Dimensions (mm): 310 W x 145 D x 380 Ht

Colour: Natural White Body + Green or Blue Cap (Send with existing stocks)

Weight: 450g

Maximum Temperature: 60 Degree Celsius

Disclaimer: Pictured colour might be slightly different due to lighting and monitor setting.

Package Included:

• 01no x 10L Jerrican (HDPE)
• 01no x Pouring Spout Cap (PP)
• 01no x Vent Cap (PP)

Features:

• Made from high quality High Density Polyethylene (HDPE).
• Easy and safe to use.
• Ergonomic top handle. With fingers grooves. Ensuring a good grip every time.
• Unmistakable brightly coloured (Lime Green) cap clearing indicate it is the refilling inlet.
• Anti-slip refilling/ vent cap allows loosening and tightening even with wet hands.
• Pouring spout & vent cap c/w loop to prevent cap misplacement.
• Minimum drips or spills with well crafted pouring spout.
• Designed to transport content safely.
• Extra wide fill cap for easy and quick filling.
• Vent hole designed to prevent backflow of negative pressure. Ensure smoother flowing pouring.
• Vent hole also allow faster refilling without back gush of air inside the jerrican.

Application:

Kitchens, F&B outlets, restaurants, outdoor camping, clinics, cleaning routines, etc. etc. Usage is only limited by one's imagination.

Material Properties

High-density polyethylene (HDPE) is a thermoplastic polymer produced from the monomer ethylene. With a high strength-to-density ratio, HDPE is used in the production of plastic bottles, corrosion-resistant piping, geomembranes and plastic lumber. HDPE is commonly recycled, and has the number "2" as its resin identification code.

HDPE is known for its high strength-to-density ratio. The density of HDPE can range from 930 to 970 kg/m3. Although the density of HDPE is only marginally higher than that of low-density polyethylene, HDPE has little branching, giving it stronger intermolecular forces and tensile strength than LDPE.

The difference in strength exceeds the difference in density, giving HDPE a higher specific strength. It is also harder and more opaque and can withstand somewhat higher temperatures (120 °C/248 °F for short periods). High-density polyethylene, unlike polypropylene, cannot withstand normally required autoclaving conditions. The lack of branching is ensured by an appropriate choice of catalyst (e.g., Ziegler–Natta catalysts) and reaction conditions.

HDPE is resistant to many different solvents.

INTERESTING FACTS

Why is HDPE so Popular?

Products made of high density polyethylene are long-lasting and easy to maintain. Food stored in HDPE containers does not get contaminated by the polymer, making it quite safe for humans. Some important attributes of this polymer are highlighted in this subsection.

Moldability

· HDPE retains its rigid structure until its melting point is reached.

· Once in the melt state, this polymer can be easily molded into any desired shape.

· This property makes it an ideal choice in the production of food containers, water bottles, and plastic lumber.

Resistance to Corrosion

· This polymer is resistant to mould and rotting, making it an ideal choice for making underground water pipes.

· Since HDPE can be sterilized via boiling, it is safe to use for food containing purposes.

· Its resistance to many chemicals, such as mineral acids and cleaning fluids, make it easy to maintain. It is also resistant to many common solvents and acids.

Strength to Density Ratio

· The density of this polymer ranges from 930 kg/m3 to 930 kg/m3.

· The structure of HDPE is linear and it contains very little branching, resulting in stronger intermolecular forces.

· The tensile strength of high-density polyethylene is very high – it can withstand heavier loads than most of the other types of polyethylene.

Recyclable

· The resin identification code of HDPE is 2, it can be recycled easily.

· Despite being non-biodegradable, it is still considered an environmentally responsible plastic.

· Recycled HDPE is used in plastic furniture, automobile parts, and rubbish cans.

To summarize, high-density polyethylene owes its popularity to its low weight, high tensile strength, high impact resistance, resistance to chemicals and high temperatures, and its ability to be easily molded.

#container #jerrican #spoutl #water #plastic #rectangular #kitchen #laundry #cheap #f&b #robust #medicalcentre #hospital #reliable